Thanks for visiting and hope you find this information helpful. I’ll try to update with more stuff at least once a week. Any questions or if you’re in the UK and need support, you can get in touch via the contact tab at the bottom of this screen.
Commands, MOC and CAT Mode on the NEC NEAX 2000 IPS
How do I enter commands in MOC?
The commands and variables used to program the NEAX 2000 IPS are in Hexadecimal (Machine Code) and will not accept alpha-numeric entries. Don’t let this scare you though because most commands remain very simple and don’t require any understanding of hex to do!
The programming entries are made up of a COMMAND, followed by a FIRST DATA VARIABLE which defines a variable to be set and then a SECOND DATA VARIABLE which will enable, disable or set a features or functions.
Command + First Data Variable + Second Data Variable
Entering A Command
The Command Manual lists the above structure in the following syntax:
ST + CM + DE + First Data Variable + DE + Second Data + EXE
ST is Start Command
DE is Data Entry
EXE is Execute Command
So, for an example from the Command Manual, using this syntax the command will be entered as folows:
CM 11 > 000 : 100
“CM” is Start Command, “>” is Data Entry and “:” is Data Entry
Extending Commands and Multiple First Data Values
Commands can also be extended beyond two Hexadecimal characters which is shown in the Feature Programming and Command Manuals as a y integer. For example, command EC has a y data of “6″
e.g. CM EC6 > 0 : 0
The First Data Variable field may use a comma , to separate multiple values when shown in the Feature Programming and Command Manuals. For example, command: 9000 (90 y = 00) has a first data with a comma seperating the First Data from the extra value: First Data: 2000 Extra Value: 00.
e.g. CM 9000 > 2000,00 : 2046
Programming Interfaces
There are 2 programming interfaces available:
1. Customer Administration Terminal (CAT) – Programming from an NEC DTERM phone
2. Maintenance Administration Terminal (MAT)
• GUI – MATWorX Menu Items
• Command Prompt – MOC (Maintenance Operation Console)
• Batch / Script Files – MACH (MOC Accelerated Command Heap) Script Editor
Entering the Commands in MOC
The commands are entered into MOC using the keyboard Function Keys (F1 to F12) as listed below:
ST is Start Command = F9 (or / )
DE is Data Entry = F8 (or space bar)
EXE is Execute Command = F2 (or . )
CE is Clear Entry = F3
S is Step Forward through Entries = F4
, is Data Seperator = F5
- is Step Backwards through Entries = F6
Backspace to erase a typed character = Backspace or F7
So to enter the commands above in MOC, the following sequece would be required:
CM 11 > 000 : 100 could be literally interpreted as “F9 11 F8 000 F8 100 F2″
CM EC6 > 0 : 0 could be literally interpreted as “F9 EC6 F8 0 F8 0 F2″
CM 9000 > 2000,00 : 2046 could literally be interpreted as “F9 9000 F8 2000,00 F8 2046 F2″
Comments
Trackbacks
Leave a Comment
You must be logged in to post a comment.